209-12MSTFD Datasheet, PDF (2/2 Pages) CTS Corporation – Through Hole DIP Switch

CTS AUTO-DIP^® SERIES CONTACT FEATURES
1. Redundant
(bifurcated)
cross radial
contactor
3. Contactor does not
deflect during actuation
2. Wiping contact action
4. Detent separate
from contactor
1. Value of Redundant (Bifurcated)
Contacts: Redundancy
dramatically reduces the probability of
contact failure, IMPROVING
RELIABILITY.
2. Value of Wiping Contact Action: Clean
contact area, IMPROVING RELIABILITY.
3. Value of Contactor Not Deflecting
During Actuation : Constant contact
pressure eliminates overstressing
contacts, IMPROVING RELIABILITY.
4. Value of Detent Separate from
Contactor: Separate detent allows
optimization of nondeflecting contactor
and detent designs, IMPROVING
RELIABILITY.
TRAVEL ^0.70
.028
6.70±0.25
.264±.010
3.62
.143
ON
CTS
1 2 3 4 5 10 11 12
SERIES DESIGNATION(209, 210)
1.0
.039
X45° CHAMFER (2)
+0.15
0.25 -0.00
.010
+.005
-.000
DATE CODE
8.00
.315
+0.64
8.25 -0.38
.325
+.025
-.015
AUTO INSERTABLE TERMINAL
"A" ^±0.30
±.012
3.2
.126
0.55±0.08
.022±.003
TYP.
1.50
.059
TYP.
2.54
.100
TYP.
3.80
+0.05
-0.10
.150
+.002
-.004
4.58 max
+0.15
0.25 -0.00
.010
+.005
-.000
8.00
.315
7.62
+0.64
-0.38
.300
+.025
-.015
STRAIGHT TERMINAL
Ø 0.8 TYP.
"A"
OVERALL
DIMENSION
6.55/.258
9.09/.358
11.63/.458
14.17/.558
16.71/.658
19.25/.758
21.79/.858
24.33/.958
26.87/1.058
31.95/1.258
NO. OF
SWITCH
POSITIONS
2
3
4
5
6
7
8
9
10
12
7.62
.300
TYP.
2.54
.100
TYP.
DIMENSION:
mm
inch
Ordering Information
209/210 – 12 M S T F D
XX: NO. OF POSITION
E: EXTENDED HEIGHT ACTUATOR(0.6mm/.024”)
M: MEDIUM ACTUATOR(0.25mm/.010”)
LP: LOW PROFILE (Flush)
BLANK : SHIP AT ON POSITION
F : SHIP AT OFF POSITION
BLANK : NO TOP TAPE SEAL
* ^{T: TOP TAPE SEAL}
* ^{Not available on Extended}
actuator
S: BOTTOM SEAL
BLANK : AUTO-INSERTABLE TERMINAL
D : STRAIGHT TERMINAL
2-2
CTS Electronic Components
© 2008 CTS Corporation. All rights reserved. Information subject to change.
12/30/08
www.ctscorp.com