767161103G Datasheet, PDF (1/4 Pages) CTS Corporation – Series 767 Surface Mount Resistor Network

Series 767
Surface Mount Resistor Network
FEATURES
• Medium Body Design
• Surface Mount Gull Wing Design
• Solid Ceramic Construction
• No Internal Dendrite Growth
• Requires 30% Less Board Space than Molded Products
of the Same Power Rating
• Meets EIA PDP SOGN-0001 Outline
• Application Specific Circuits are Available
• Compatible with Solder Reflow Process
• Tape and Reel Packaging or Slide Packs
• RoHS Compliant in Accordance with EU Directive 2011/65/EU
- Lead-Free Termination Finish
- Exemption 7(c)-I, Electrical and electronic components containing lead [Pb] in glass
ORDERING INFORMATION
767
P
NUMBER OF PINS
14 = 14 pins
16 = 16 pins
SCHEMATIC
1 - Bussed Circuit
3 - Isolated Circuit
5 - Dual Terminator Circuit
7 - Ladder
RESISTOR CODE
Refer to tables on Page 2.
[Codes are 3 - 4 characters.]
Notes:
1. No dashes or spaces to appear in part number.
2. Example Part Numbers;
Tape & Reel, 767141103GPTR13.
Slide Pack, 767141103GP.
PACKAGING
Blank = Slide Pack
TR13 = Tape & Reel, 13" reel
RoHS COMPLIANT
Lead Finish: SnAgCu over Ni
barrier on Cu lead wire.
Schematic 1 & 3
J = ±5%
G = ±2% [Std]
F = ±1%
D = ±1/2%
TOLERANCE
Schematic 5
Tolerance code is not added for
dual terminator configuration.
Standard tolerance is ±2%.
Schematic 7
F = ±1 LSB
D = ±1/2 LSB
[LSB = Least Significant Bit]
Not all performance combinations and resistor values may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
Document No. 008-0349-0
Page 1 - 4
www.ctscorp.com
Rev. C