766163101GP Datasheet, PDF (1/5 Pages) CTS Corporation – Leaded Surface Mount Series 766 Technical Data

Leaded Surface Mount Series 766
Technical Data
Features
• Narrow Body Design
• Solid Ceramic Construction
• No Internal Dendrite Growth
• Requires 30% Less Board Space Than Molded
Products of the Same Power Rating
• Meets EIA PDP SOGN-0001 Outline
• Packaged in Tape & Reel or Slide Packs
• Application Specific Circuits are Available
• Compatible With All Solder Processes
Wave, IR Reflow, Vapor Phase Reflow
• RoHS Compliant Version Available
Resistance Tolerance:
Standard: ±2% or 0.5Ω (whichever is greater)
Special: ±0.25% or 0.3Ω (whichever is greater)
Resistance Range:
Standard: 10Ω to 1 MegΩ
Operating Temperature Range:
-55°C to +125°C
Dielectric Strength:
100 VAC
Temperature Coefficient:
Standard: 100Ω to 1 MegΩ
100PPM/°C typical
10Ω to 99Ω
±200PPM/°C typical
Maximum Operating Voltage:
50V not to exceed rated power
Power Rating (Total Network Power):
@25°C
@70°C
14 Pin
1.6w
1.0w
16 Pin
1.8w
1.2w
Maximum Resistor Power:
(Not to Exceed Total Network Power)
Schematic
@25°C
@70°C
1
0.12w
0.08w
3
0.24w
0.16w
5
0.12w
0.08w
7
0.12w
0.08w
Page 1 of 5
CTS Electronic Components
October 2006
www.ctscorp.com