450T220R103B1_16 Datasheet, PDF (1/9 Pages) CTS Corporation – Industrial 24mm Diameter 1/2 Watt, Composition Rotary Potentiometer

®
Electrocomponents
Series 450 Data Sheet
Rotary Potentiometer
Industrial
24mm Diameter
1/2 Watt, Composition
Rotary Potentiometer
Features
- Bushing
- Twist or Bend Tab
- Snap-in PC Bracket
- PC Terminal
Electrical and Mechanical Specifications
Resistance Range
100 ohms through 10 Megohms, linear
1K ohms through 1 Megohms, audio
Rotational Torque
Standard: 54 - 432 gf-cm
(Consult CTS for special torque)
Resistance Tolerance
±30%, ±20%, ±10%
Stop Strength
10.36 kgf-cm minimum
Power Rating
1/2 watts @ 55°C (Resistance up to 100K ohms)
1/3 watts @ 55°C (Resistance above 100K ohms)
Dielectric Strength
1080 VAC for 1 minute
Maximum Operating Voltage
750 VDC
Insulation Resistance
100 Megohms minimum @ 250 VDC
Angle of Rotation
Total Rotation (Potentiometer and Switch)
With rotary switch: 320°
Without switch or with push switch: 300°
Electrical Effective Angle (Potentiometer)
300°
Push-Pull Strength of Shaft
10 kg for 10 seconds
Rotational Life
Standard: 10K cycles
Special: 100K, 250K cycles
Operating Temperature
-10°C to +80°C
Solder Heat Resistance
260°C for 5 seconds
Mounting Information
- Bushing
- Twist Tab
- Bend Tab
- Snap-in PC Bracket
- PC Terminal
1-9
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
04/29/15
www.ctscorp.com