450 Datasheet, PDF (1/2 Pages) CTS Corporation – Industrial 15/16 (24mm) diameter 1/2 watt composition variable resistor

Series 450 Stock Pot™
®
Industrial
15/16" (24mm)
diameter 1/2 watt
composition
variable resistor
The CTS 450 Stock Pot™ Program provides
immediate off-the-shelf availability from select CTS
distributors. The program offers a choice of 11 of
the most commonly used resistance values, linear or
10% logarithmic tapers and 17 popular plug in
shafts which can be quickly assembled.
• Off-the-shelf availability
• Choice of linear or 10% logarithmic tapers
• Wide resistance range
• ±20% resistance tolerance
• Available with four shaft styles: knurled and
slotted, flatted or round, with a wide selection
of lengths and styles. Generally eliminates the
need for cutting or modification.
• Economical even in limited volume applications
• Supplied with mounting hardware
Electrical and Mechanical Specifications
Resistance Range
500 ohms through 1 Megohm
Resistance Tolerance
Standard ±20%
Power Rating, Watts
Through 10K ohms, ¹/2 watt; above 100K ohms
through 100K ohms, ¹/3 watt; above 100K ohms,
1_{/4 watt}
Voltage Rating
Bushing to terminals:
High pot test, one minute — 1080 VAC
Operating maximum — 750 VDC
Angle of Rotation
Total Rotation: 300 degrees, ±5º
Effective Rotation: approximately 300 degrees
Bushing Information
Material: diecast zinc
Diameter: EIA std. ³/8 – 32 UNEF-2A thread
Length: ³/8" ±¹/64" (9.53mm ± 0.39mm)
Available with ³/8" – 32 UNEF-2A thread only
Terminal Information
Solder lug, PC formed to rear
Locating Lug
Left side, terminals down
Shaft Information
Diameter: .250" (6.35mm)
Optional Switch
SPST rotary switch 050 is available with limited shaft
and resistance options. See ordering information.
Technical Data Sheet 1448C
Technical Data Sheet 1450SPB
CTS CORPORATION / MANUFACTURER OF RELIABLE ELECTRONIC COMPONENTS