296XB252B2N Datasheet, PDF (1/2 Pages) CTS Corporation – Commercial 12mm Diameter Carbon Composition Rotary Potentiometer

®
Electrocomponents
Series 296 Data Sheet
Rotary Potentiometer
Commercial
12mm Diameter
Carbon Composition
Rotary Potentiometer
Features
• Miniature 12mm size
• Low cost
• Snap-in bracket for PC board mounting
• Detent available
• Insulated shaft available
• RoHS compliant
Electrical and Mechanical Specifications
Resistance Range
500 ohms through 1 Megohms
Resistance Tolerance
±30%, ±20%, ±10%
Power Rating
0.15 watts @ 50°C
Dielectric Strength
500 VDC for 1 minute
Maximum Operating Voltage
350 VDC
Insulation Resistance
100 Megohms minimum @ 250 VDC
Rotational Angle
Mechanical angle: 300°
Effective angle: 280°
Rotational Torque
20 – 216 gf-cm
Stop Strength
5.76 kg-cm minimum (VR without detent)
3 kg-cm minimum (VR with detent)
Mounting Information
P.C. board mounting
Type "X": Shaft parallel to P.C. board
Type "U": Shaft vertical to P.C. board
Type "H": Same as "X" except hook terminals
Detent
Detent @ 50% rotation
Push-Pull strength on shaft
8 kg for 10 seconds
Rotational life
10K cycles
Operating temperature
-10°C ~ 80°C
Solder Heat Resistance
260°C for 5 seconds
1-2
CTS Electrocomponents
© 2009 CTS Corporation. All rights reserved. Information subject to change.
2/06/09
www.ctscorp.com