262 Datasheet, PDF (1/2 Pages) Littelfuse – MICRO FUSE Very Fast-Acting Type 262/268/269 Series

Series 262
®
Commercial
Miniature
10mm Conductive
Plastic Trimmer
Potentiometers
Features
• Miniature size
• Adjustment knob slotted for front or
rear screwdriver adjustment
• P.C. mounting with knob parallel or
perpendicular to printed circuit board
• Low cost
• Low height profile
• Wide resistance range
• Reliable screened CTS composition
element
• RoHS Compliant
Electrical and Mechanical Specifications
Resistance Range
Standard: 500 ohms through 2 megohms.
Special: Please consult CTS.
Resistance Tolerance
Standard: ±20%
Special: Available ±10%, ±30%
Standard Color Chart
VALUE COLOR VALUE COLOR VALUE COLOR
500Ω
1KΩ
2.5KΩ
5KΩ
Green
Yellow
Red
Blue
10KΩ
25KΩ
50KΩ
100KΩ
White
Black
Orange
Gray
250KΩ
500KΩ
1MΩ
2MΩ
Violet
Brown
Light Blue
Pink
Power Rating, Watts
0.15 watts @ 40°C derated to no load @ 100°C.
Voltage Rating
Operating maximum — 350 VDC.
Load not to exceed wattage rating.
Angle of Rotation
Total Rotation: 265° ± 5°
Effective Rotation: 260° (approximately)
Rotational Torque
.3 to 5 in-oz (21.6 to 360 gf-cm)
Resistance Tapers
Linear
Stop Strength
16 inch ounces (1.2 kgf-cm)
Adjustment Knob
Color coded nylon knob with hex hole for top
adjustment plus slot for either top or bottom
screwdriver adjustment.
1-2
CTS Electronic Components
© 2006 CTS Corporation. All rights reserved. Information subject to change.
9/30/06
www.ctscorp.com