219 Datasheet, PDF (1/2 Pages) CTS Corporation – Surface mount DIP Switch-Auto Placeable

Series 219 SMT DIP
®
Surface mount
DIP Switch —
Auto Placeable
Features
Optimized Mechanical Features
• Removable tape seal to withstand IR vapor phase
or wave soldering temperatures, board washing
• Positive detent separate from contactor
• Low profile and medium height actuators
available
• SPST configurations, 2 through 10 and 12
positions
• .686mm (.027") actuator travel
• Gull-wing and “J” lead terminal configurations
Optimized Contact System
• Redundant, wiping contact
• Contactor does not deflect during actuation
Premium Materials
• Gold plated contacts, solder coated terminals
• Copper alloy contactor
• High temperature materials (UL 94 V-0)
Electrical and Mechanical Specifications
Switch Function
Single pole single throw
Switch Contact Resistance
25 milliohms maximum initial
50 milliohms maximum at end of life
Insulation Resistance
1,000 megohms minimum between
insulated terminals
Dielectric Strength
500 VDC minimum for 1 minute
Nonswitching Rating
100 mA or 50 VDC
Switch Capacitance
5 pF maximum between adjacent closed switches
Temperature Range
–40°C to +85°C
Actuation Life
2,000 cycles switching 100 mA @ 20 VDC or
.1 mA @ 5 VDC (dry circuit)
Coplanarity
0.10mm (.004") maximum
Allowable Solder Time
IR and vapor phase - up to 60 seconds at 260°C
Wave - up to 6 seconds @ 260°C
Vibration
Per MIL-STD-202F, method 204D, condition B
(.065" or 15 G’s between 10 HZ to 2K Hz) with no
contact inconsistencies greater than 1
microsecond.
Shock
Per MIL-STD-202F, method 213B, condition A
(50 G’s) with no contact inconsistencies greater
than 1 microsecond.
Sealing
Bottom seal standard
Top tape seal optional
Marking
Special marking available consult CTS.
Technical Data Sheet 4219C
CTS CORPORATION / MANUFACTURER OF RELIABLE ELECTRONIC COMPONENTS