218-8LPST Datasheet, PDF (1/2 Pages) CTS Corporation – Half Pitch, SMD DIP Switch

®
Electrocomponents
Series 218 Data Sheet
Half Pitch, SMD DIP Switch
SMT Half Pitch DIP
Switch–Auto
Placeable
Features
Optimized Mechanical Features
• Removable tape seal to withstand IR vapor phase
or wave soldering temperatures and board washing
• Gull-wing and "J" bend terminal configurations
• Low profile actuators prevent accidental actuation
• ^{SPST configuration available}
Optimized Contact System
• Redundant, wiping contact
• Contactor does not deflect during actuation
• 0.6 mm/.024" actuator travel
Materials
• Gold plated beryllium copper contacts
• Gold flash coated terminals
• High temperature materials (UL94V-0)
• RoHS Compliant
Electrical and Mechanical Specifications
Switch Function
SPST - 2, 4, 6, 8, 10, and 12 positions
Switch Contact Resistance
100 milliohms maximum initial
100 milliohms maximum at end of life
Insulation Resistance
100 megohms minimum between
insulated terminals
Dielectric Strength
350 VAC for 1 minute between
adjacent switches
Nonswitching Rating
100 mA or 50 VDC maximum
Switch Capacitance
10 pF maximum between adjacent
closed switches
Operating Temperature
- 55°C to +85°C
Actuation Life
1,000 cycles switching 25 mA @ 24 VDC
Coplanarity
Coplanarity of 0.1mm/.004" maximum
Allowable Solder Time
Up to 60 seconds at 260°C
Vibration
Per MIL-STD-202G, method 204D, condition B
(.06" or 15G’s between 10 HZ to 2 KHz) with
no contact inconsistencies greater than 1
microsecond.
Shock
Per MIL-STD-202G, method 213B, condition A
(50G’s) with no contact inconsistencies greater
than 1 microsecond.
Sealing
Standard bottom seal
Optional top tape seal
Marking
Special marking available-consult CTS
Packaging
Standard : Anti-static tube packaging
Optional : Tape and reel packaging
1-2
CTS Electrocomponents
© 2008 CTS Corporation. All rights reserved. Information subject to change.
12/30/08
www.ctscorp.com