CTIHLP1604AF Datasheet, PDF (1/1 Pages) Central Technologies – Power Inductors - Shielded

Power Inductors - Shielded
www.ctparts.com
CTIHLP1604AF
Series
From .10 µH to 10 µH
SPECIFICATIONS
Part numbers indicate inductance tolerance available.
M = ±20%, N = ±30%
*Irms: Will cause the coil temp. rise approximately DT of 40°C. (Keep 1 Min)
**Isat: Will cause L0 to drop approximately 20%. (Keep quickly)

Part
Inductance
Number
(µH)
CTIHLP1604AF-R10N
0.10
CTIHLP1604AF-R22M
0.22
CTIHLP1604AF-R47M
0.47
CTIHLP1604AF-1R0M
1.00
CTIHLP1604AF-1R5M
1.50
CTIHLP1604AF-2R2M
2.20
CTIHLP1604AF-3R3M
3.30
CTIHLP1604AF-4R7M
4.70
CTIHLP1604AF-5R6M
5.60
CTIHLP1604AF-6R8M
6.80
CTIHLP1604AF-8R2M
8.20
CTIHLP1604AF-100M
10.0
L Test
Freq.
(KHz)
100
100
100
100
100
100
100
100
100
100
100
100
DCR
Typ.
(mΩ)
4.3
6.6
18.0
41.0
55.0
69.2
84.0
128
180
300
313
410
DCR
Max.
(mΩ)
5.5
8.0
20
47
63.3
80
97
145
208
360
376
463
*Irms
Typ.
(A)
11.5
8.5
6.0
4.0
3.0
2.8
2.3
2.0
1.7
1.5
1.4
1.3
**Isat
Typ.
(A)
25
20
6.5
6.0
4.0
3.5
3.0
2.5
2.3
1.7
1.6
1.4
Size A
mm 4.45±0.25
inches 0.17±0.012
PHYSICAL DIMENSIONS
B
C
D
4.06±0.25
0.16±0.008
1.0±0.2
0.04±0.008
0.76±0.3
0.03±0.012
E
2.0±0.2
0.08±0.008
Not Shown at Actual Size
A
C
D
CHARACTERISTICS
Description: SMD (shielded) power inductor.
Applications: Notebook, Desktop, Server applications, Low
profile, high current power supplies, battery powered devices,
DC/DC converter for Field Programmable Gate Array (FPGA).
Operating Temperature: -55°C to +125°C (The part temperature
(ambient + temp. rise) should not exceed 125°C under worst case
operating conditions. Circuit design, component placement, PWB
trace size and thickness, airflow and other cooling provisions all
affect the part temperature. Part temperature should be verified in
the end application)
Inductance Tolerance: ±20%, ±30%
Testing: Inductance is tested on an HP4285A at 100KHz, 1.0V
Packaging: Tape & Reel.
Marking: Parts are marked with inductance code.
Miscellaneous: RoHS Compliant.
Additional Information: Additional electrical & physical
information available upon request.
Samples available. See website for ordering information.
1R5
Unit: mm
Marking: Inductance Code
PAD LAYOUT
5.2
2.2
Manufacturer of Passive Components
800-684-5322 Inside US
949-453-1811 Outside US
Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
REV 12.18.12