CTF2012S Datasheet, PDF (1/1 Pages) Central Technologies – Common Mode Choke Coils - Radial

Common Mode Choke Coils - Radial
ctparts.com
CTF2012S Series
From 0.4 mH to 4.5 mH
Not shown at actual size.
SPECIFICATIONS
* Indicates the inductance difference between the coil L1 and L2.
Part
Number
Inductance
Min.
(mH)
CTF2012S-452M2R0
4.5
CTF2012S-452M3R3
4.5
CTF2012S-202M3R0
2.0
CTF2012S-202M5R0
2.0
CTF2012S-102M5R0
1.0
CTF2012S-601M8R0
0.6
CTF2012S-401M10R
0.4
Inductance
Difference*
(µH Max.)
100
150
75
50
50
50
50
DCR
Max.
(Ω)
0.15
0.09
0.10
0.045
0.05
0.015
0.01
Rated
Current
(Aac)
2.0
3.3
3.0
5.0
5.0
8.0
10
Ød
(mm)
0.55
0.65
0.65
0.75
0.8
1.1
1.1
PHYSICAL DIMENSIONS
10±1
(0.394±0.039)
1
4
30(1.181)Max.
CHARACTERISTICS
Description: Common mode choke coils for power supply line.
Applications: Prevents noise emission, protects AC side from the
affects of switching regulators, provides noise elimination and
immunity for TV’s, VTR’s/VCR’s, audio equipment, etc.
Operating Temperature: -25°C to +85°C including self
Epoxy
temperature rise
ød
Insulation Resistance: 100 Mohm minimum between each
winding for 1 minute
Dielectric Withstanding Voltage: 2000 Vac between each
winding for 1 minute
Packaging: Bulk Pack
Marking: None
Additional Information: Additional electrical & physical
information available upon request. Different inductance and
current products are available as well.
Samples available. See website for ordering information.
2
3
1
L1
2
4
L2
3
Dimensions in mm (inches)
CENTRAL
08.17.04
Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids
800-684-5322 Inside US
949-453-1811 Outside US
Copyright © 2003 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice