CTEP125U Datasheet, PDF (1/1 Pages) Central Technologies – Power Inductors - Shielded

Power Inductors - Shielded
ctparts.com
CTEP125U Series
From 0.3 µH to 5.6 µH
RoHS
Compliant
Available
Not shown at actual size.
SPECIFICATIONS
Parts are available in ±20% only.
* This indicates the current when the inductance decreases to 75% over it’s nominal value or DC current
when the temperature rising ∆T=40°C lower, whichever is lower.
CTEP125UF Please specify “F” for RoHS compliant
Part
Number
CTEP125U_-0R3M
CTEP125U_-0R6M
CTEP125U_-0R8M
CTEP125U_-1R4M
CTEP125U_-2R2M
CTEP125U_-3R2M
CTEP125U_-4R3M
CTEP125U_-5R6M
Inductance
(µH ±20%)
0.3
0.6
0.8
1.4
2.2
3.2
4.3
5.6
L Test
Freq.
(kHz)
100
100
100
100
100
100
100
100
DCR
Max.
(mΩ)
2.5
2.5
2.5
3.4
5.4
8.0
11.4
13.5
*Current
(A)
35.0
30.0
27.2
20.8
14.8
12.8
11.0
9.5
Size A
Max.
mm
12.9
inches .51
PHYSICAL DIMENSIONS
B
C
D
E
F
Max.
Max.
GH
12.9
5.8
2.6±.2 7.0±.2 4.0±.2 4.2±.2 2.5±.2
.51
.23
.10±.01 .28±.01 .16±.01 0.17±0.1 .10±.01
CHARACTERISTICS
Description: SMD shielded power inductor
Applications: Power supplies for VTR, OA equipment, LCD
televisions, PC notebooks, portable communication equipment,
DC/DC converters, etc.
Operating Temperature: -30°C to +100°C
Inductance Tolerance: ±20%
Testing: Tested on a HP4285A at 100 KHz , 0.25Vrms , 0Adc
Packaging: Tape & Reel
Marking: Parts are marked with inductance code
Miscellaneous: RoHS Compliant available.
Additional Information: Additional electrical & physical
information available upon request
Samples available. See website for ordering information.
PAD LAYOUT
CENTRAL
01.03.06
Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids
800-684-5322 Inside US
949-453-1811 Outside US
Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice