CTDLW31S Datasheet, PDF (1/1 Pages) Central Technologies – Common Mode Chokes

Common Mode Chokes
ctparts.com
CTDLW31S Series
From 90 Ω to 600 Ω
Not shown at actual size.
SPECIFICATIONS
CTDLW31SF Please specify “F” for RoHS compliant.
Part
Number
Common Mode
Imp. @100MHz
(Ω)
CTDLW31S_-900T04 90±25%
CTDLW31S_-161T03 160±25%
CTDLW31S_-221T03 220±25%
CTDLW31S_-601T03 600±25%
DCR
Max.
(Ω)
0.30
0.40
0.50
0.80
Rated
Current
(mA)
400
350
350
260
Rated
Volatge
(Vdc)
50
50
50
50
Withstand
Voltage
(Vdc)
125
125
125
125
Insulation
Resis. Min.
(Ω)
10M
10M
10M
10M
Size
mm
inches
PHYSICAL DIMENSIONS
A
B
C
3.2±0.2
0.125±0.008
1.6±0.2
0.063±0.008
2.0±0.2
0.079±0.008
D
Typ.
0.6
0.024
CHARACTERISTICS
Description: SMD Wire Wound Common Mode Choke Coils for
Signal Lines
Applications: Suitable for radiation noise suppression for any
electronic devices. Used to counter common mode noise
interferance within high speed signal lines. Applications like: USB
2.0 Line for personal computers and peripheral devices, IEEE1394
line for personal computers, DVC etc and LVDS, panel link line for
crystal display panels.
Operating Temperature: -55°C to +125°C
Testing: Impedance is tested on an HP4287A at 100 MHz
Packaging: Tape & Reel
Marking: Reels marked with part number.
Additional Information: Additional electrical & physical
information available upon request
Miscellaneous: RoHS Compliant available.
Samples available. See website for ordering information.
PAD LAYOUT
CENTRAL
04.30.07
Manufacturer of Passive and Discrete Semiconductor Components
800-684-5322 Inside US
949-453-1811 Outside US
Copyright © 2007 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice