CCSO-914X3-1000 Datasheet, PDF (3/3 Pages) Crystek Corporation – True SineWave SAW Based Clock Osc 9x14MM SMD 3.3 Volt

CCSO-914X3-1000
Actual Plot
CCSO-914X3-1000
True SineWave
SAW Based Clock Oscillator
9×14mm SMD
3.3 Volt
Crystek Part Number Guide
CCSO - 914X3 L - 1000
#1
#2
#3
#1 Crystek Saw Osc.
#2 Model 914 with -40/85°C Temperature Range
#3 Height (L = 0.135") (Blank = 0.210")
Frequency vs Temperature
RECOMMENDED REFLOW SOLDERING PROFILE
260°C
217°C
Ramp-Up
3°C/Sec Max.
Critical
Temperature Zone
Ramp-Down
6°C/Sec.
200°C
150°C
Preheat
180 Secs. Max.
8 Minutes Max.
90 Secs. Max.
260°C for
10 Secs. Max.
NOTE: Reflow Profile with 240°C peak also acceptable.
Parameter
Mechanical Shock
Mechanical Vibration
Solderability
Solvent Resistance
Resistance to Soldering Heat
Thermal Shock
Moisture Resistance
Conditions
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2003
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition I or J
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Rev: K
Date: 18-Jan-2017
Page 3 of 3
C CRYSTEK
CORPORATION
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: [phone] • 800-237-3061
Fax: [phone] • www.crystek.com