CS-SM-MHD Datasheet, PDF (1/2 Pages) CRYSTEK CORPORATION – SMA Plug, Solder Clamp for Harbour SS402 Cable

MICROWAVE
A Division of Crystek Corporation
NOTE: Distance from end of cable
center conductor to Ref. Pl. is 0.289
NOTES:
1.0 Materials
1.1 Body, Coupling, and Clamp Nuts: Steel. Corrosion Resistant per ASTM-A582.
UNS No. S30300.
1.2 Center Conductor: Beryllium Copper per ASTM-B196. UNS C17300.
1.3 Solder Ferrule: Brass per ASTM-B16. UNS C36000.
1.4 Lock Ring: Beryllium Copper per ASTM-B197. UNS C17200.
1.5 Gasket and O-Ring: Silicone Rubber per A-A-59588.
1.6 Insulators: PTFE Fluorocarbon per ASTM-D1710.
2.0 Finishes
2.1 Center Contact and Solder Ferrule: Gold Plate per ASTM-B488 50 Microinches Min. thickness
over Electrolytic Nickel Plate per ASTM-B689 50 Microinches Min. thickness.
2.2 Body, Coupling, and Clamp Nuts: Passivated per SAE-AMS-2700.
2.3 Gasket, O-Ring, and Dielectric Bead: None.
3.0 Interface: Type SMA Plug per Crystek Interface Specification CC-SMAP
(Meets MIL-STD-348. Figure 310-1).
CRYSTEK
CORPORATION
Page 1 of 2
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: [phone] • 800-237-3061
Fax: [phone] • www.crystek.com