D050505T-1W_12 Datasheet, PDF (3/3 Pages) Crystek Corporation – 1W, FIXED INPUT, ISOLATED & UNREGULATED TWIN OUTPUT ULTRAMINIATURE SMD PACKAGE DC-DC CONVERTER

OUTLINE DIMENSIONS& RECOMMENDED FOOTPRINT
MECHANICAL DIMENSIONS
17.78 [0.700]
15.24 [0.600]
RECOMMENDED FOOTPRINT
14 13 12 10 9 8
(Top View)
12 3
56 7
0.60 [0.024]
2.54 [0.100]
5.75 [0.226]
(Front View )
6.00 [0.236]
12.22 [0.481]
A
0.25 [0.010]
A
5 max
1.30 [0.051]
Note:
Unit: mm[inch]
Pin section tolerances: ±0.10mm[±0.004inch]
General tolerances: ±0.25mm[±0.010inch]
TUBE OUTLINE DIMENSIONS
21.50 [0.846]
14.30 [0.563]
14 13 12 10 9 8
123
5 67
2.10 [0.083]
1.00 [0.039]
Note: gr id 2.54*2. 54m m.
FOOTPR INT DETAILS
Pin
Function
1
GND
2
Vin
5
0V1
6
Vo1
9
Vo2
10
0V2
Others
NC
NC:No Connection
REEL PACKING OUTLINE DIMENSIONS
Taping dimension:
4.00 [0.157]
∅1.50[0.059] 18.00[0.709]
∅1.50[0.059]
2.00 [0.079]
1.75 [0.069]
14.20[0.559]
0.50[0.020]
8.00 [0.315]
9.80 [0.386]
7.60 [0.299]
8.30 [0.327]
Note:
Unit: mm[inch]
General tolerances: ±0.50mm[±0.020inch]
L=530mm[20.866inch] Devices per tube quantity: 28pcs
L=220mm[8.661inch] Devices per tube quantity: 10pcs
Short tube inner package dimensions: L*W*H= 255*170*80mm
Short tube outer package dimensions(with six inner package boxes):
L*W*H= 375*280*270mm
Long tube inner package dimensions: L*W*H= 580*200*100mm
Long tube outer package dimensions(with two inner package boxes):
L*W*H= 600*215*220mm
Long tube outer package dimensions(with three inner package boxes):
L*W*H= 600*215*325mm
24.00 [0.945]
Taping reel dimension:
6.80[0.268]
37.40 [1.472]
∅100.00 [3.937]
∅13.00 [0.512]
Note:
∅21.50 [0.846]
Unit:mm[inch]
General tolerances: ±0.50mm[±0.020inch]
Per reel of packing quantity:400pcs
Innerpackage cartondimensions:L*W*H=365*350*105mm
Tube Quantity:800pcs
Outerpackagecartondimensions:L*W*H=390*360*245mm
Tube Quantity:1600pcs
Note:
1. Operation under minimum load will not damage the converter; However, they may not meet all specification listed, and that will reduce the life
of product.
2. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
3. Only typical models listed, other models may be different, please contact our technical person for more details.
4. In this datasheet, all the test methods of indications are based on corporate standards.
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
D_T-1W
B/1-2012
Page 3 of 3