CCSO-914X_15 Datasheet, PDF (3/4 Pages) Crystek Corporation – SAW Based Clock Oscillator

CCSO-914X
True SineWave
SAW Based Clock Oscillator
9×14mm SMD
3.3 & 5.0 Volt
Frequency vs Temperature
Available Frequencies (MHz):
245.760 800.000
250.000 916.000
433.920 1000.000
500.000 1090.000
622.080
Custom Frequencies Available with NRE Fee
Crystek Part Number Guide
CCSO - 914X 3 L - 315.500
#1
#2 #3 #4
#5
#1 Crystek Saw Osc.
#2 Model 914 with -40/85°C Temperature Range
#3 (3 = 3.3Volts) (Blank = 5 Volts)
#4 Height (L = 0.135") (Blank = 0.210")
#5 Frequency in MHz: 3 or 6 decimal places
Similar Product in 5×7.5mm Package
Click Here
RECOMMENDED REFLOW SOLDERING PROFILE
260°C
217°C
Ramp-Up
3°C/Sec Max.
Critical
Temperature Zone
Ramp-Down
6°C/Sec.
200°C
150°C
Preheat
180 Secs. Max.
8 Minutes Max.
90 Secs. Max.
260°C for
10 Secs. Max.
NOTE: Reflow Profile with 240°C peak also acceptable.
Parameter
Mechanical Shock
Mechanical Vibration
Solderability
Solvent Resistance
Resistance to Soldering Heat
Thermal Shock
Moisture Resistance
Conditions
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2003
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition I or J
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Rev: P
Date: 10-Jul-2015
Page 3 of 4
C CRYSTEK
CORPORATION
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: [phone] • 800-237-3061
Fax: [phone] • www.crystek.com