CVPD-952 Datasheet, PDF (1/2 Pages) Crystek Corporation – Ultra-Low Phase Noise Voltage Controlled Crystal Oscillator

Ultra-Low Phase Noise
Voltage Controlled
Part Number CVPD-952
9×14 mm SMD, 3.3V, LVPECL
Crystal Oscillator
Frequency Range:
131.000 MHz to 200.000 MHz
Frequency Pulling:
±20 ppm APR Min*
Temperature Range:
0°C to 70°C (standard)
(Option X):
-40°C to 85°C
Storage:
-45°C to 90°C
Input Voltage:
3.3 V ±0.3 V
Control Voltage:
1.65 V ±1.65 V
Input Current:
92 mA Typical, 100 mA Max
Output:
LVPECL
Symmetry:
45/55% Max @ zero crossing point
Rise/Fall Time:
2nSec Max (20% to 80%)
Linearity:
±10% Max
Load: Terminated to Vcc -2V into 50 ohms
Logic:
"0" = 1.43V Min, 1.68V Max
"1" = 2.05V Min, 2.48V Max
Disable Time:
200 µSec Max
Enable Time:
200 µSec Max
Phase Jitter (RMS): 12 kHz to 20 MHz 75 fSec Typical for 153.6 variant
Phase Noise (Typical): 1 Hz:
-40 dBc/Hz
10 Hz:
-70 dBc/Hz
100 Hz:
-100 dBc/Hz
1 kHz:
-130 dBc/Hz
10 kHz:
-148 dBc/Hz
100 kHz:
-150 dBc/Hz
Sub-Harmonic @ Fo/2:
Aging:
-35 dBc Max
<3 ppm 1^st year, <1 ppm every year thereafter
153.600 MHz
* APR= Absolute Pulling Range inclusive of all conditions
Rev: E
Date: 29-Sep-2015
Page 1 of 2
C CRYSTEK
CORPORATION
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: [phone] • 800-237-3061
Fax: [phone] • www.crystek.com