CVP-140 Datasheet, PDF (1/1 Pages) Crystek Corporation – Differential PECL Voltage Controlled Crystal Oscillator

CVP-140 Series
14Pin DIP, 3.3V & 5V, PECL
LeaCRdooFmHrpeSleiant
Frequency Range:
15MHz to 175MHz
Frequency Pulling:
(CVP-140) ±50ppm Min, ±100ppm Max
(CVP-141) ±75ppm Min, ±150ppm Max
(CVP-142) ±100ppm Min, ±200ppm Max
(CVP-143) ±200ppm Min
Frequency Stability:
±20ppm @ 0°C to 70°C
(inclusive of all conditions)
Temperature Range:
0°C to 70°C
Storage:
-55°C to 120°C
Input Voltage:
5V ± 0.5V
3.3V ± 0.3V
Control Voltage:
2.5V ± 2.0V
1.65V ± 1.65V
Input Current:
88mA Typical
Output:
Differential PECL
Symmetry:
45/55% Max @ 50% Vdd
Rise/Fall Time:
350ps Max @ 20% to 80% Vdd
Linearity:
± 10% Max
Logic: Terminated to Vdd-2V into 50 ohms
Logic "0"
"0" = Vcc-1.85V Min, Vcc-1.62V Max
Logic "1"
"1" = Vcc-1.02V Min, Vcc-0.81V Max
Disable Time
200ns Max
Start-up Time
1ms Typ., 2ms Max
Phase Jitter:
12KHz to 80MHz 0.5psec Typ., 1psec RMS Max
Aging:
<3ppm 1st/yr, <1ppm every year thereafter
Differential PECL
Voltage Controlled
Crystal Oscillator
Designed to meet drop in
replacement requirements for
3.3V & 5V Differential PECL
applications. The CVP-140
Series supports three pullability
configurations. Available in two
14 Pin DIP configurations.
Standard can height is .300"
with low profile .200" option
available.
0.820
(20.83)
0.750
(19.05)
CRYSTEK
Frequency
Part Number
Date Code
0.450
(11.43)
0.520
(13.21)
"A" "B"
0.200 0.300
(5.08) (7.62)
"A" "B"
0.200 0.300
(5.08) (7.62)
0.260
(6.60)
0.260
(6.60)
0.600 (15.24)
12
57
0.300
(7.62)
Bottom View
Pin out
"C"
14
98
0.100 (2.54) repeat
0.600 (15.24)
1
7
0.300
(7.62)
Bottom View
Pin out
"D"
14
98
0.100 (2.54)
Pad
Connection
1 Volt Cont. Volt Cont.
2
N/C
5
N/C
7
GND GND
8
OUT OUT
9
COUT COUT
14
Vdd
Vdd
Pin Option:
"C"
"D"
Environmental Specifications:
Shock:
1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane
Vibration: 10 ~ 2,000 Hz of 06" d.a or 20 Gs, whichever is less
Humidity: Resistant to 85° R.H. at 85° C
Mechanical Specifications
Leak:
In accordance with Mil-Std-883, Method 1014, Cond 1A
Pins:
Kovar, with gold over nickel
Bend Test: Will withstand two bends of 90° from reference
Header: Steel with gold over nickel (package "C" only)
Case:
Stainless steel
Marking: Epoxy ink or engraved
Resistance to Solvents: MIL-STD 202, Method 215
Crystek Part Number Guide
CVP-14? ? ?-155.520
#1
#2 #3 #4
#5
#1 CVPL=3.3V, CVP=5V
#2 Pull 14? 0=(50~100), 141=(75~150), 142=(100~200), 142=(200+)
#3 Package Height (A) or ((B) Standard)
#4 Pin out configuration (C) or (D)
#3 Frequency in MHz: 3 or 6 decimal places
Example:
CVP-141AC-155.520 = 5V, 45/55, 0/70°C, 20ppm, 50~100ppm Pullability
0.200" Height, 7 pins, 155.520 MHz
Specifications subject to change without notice. TD-030707 Rev. C