CUSO33XX_15 Datasheet, PDF (1/1 Pages) Crystek Corporation – 3.2×5.0 mm SMD, 3.3V, HCMOS

CUSO33xx Model
3.2×5.0 mm SMD, 3.3V, HCMOS
Frequency Range:
Frequency Stability:
Temperature Range:
Operating:
(Option M)
(Option E)
Storage:
Input Voltage:
Input Current:
Standby Mode:
Output:
Symmetry:
Rise/Fall Time:
Logic:
Load:
Jitter: 12kHz to 20MHz
Aging:
1.544 MHz to 160.000 MHz
±25ppm to ±100ppm
0°C to 70°C
-20°C to 70°C
-40°C to 85°C
-45°C to 120°C
3.3V ± 0.3V
<30 MHz 4-10mA (freq. dependent)
>31 MHz 10-20mA (freq. dependent)
5uA Max
HCMOS
45/55% Max @ 50% Vdd
2ns Typ., 4ns Max
"0" = 10% Vdd Max
"1" = 90% Vdd Min
15pF Max
0.5ps Typ, 1ps Max RMS
<3ppm 1^st/yr, 1ppm every year thereafter
Designed to meet application
requirements for smaller layout areas.
The CUSO (Crystek Ultra Small
Oscillator) Series utilizes fundamental
and 3^rd overtone crystal design
thereby providing the proven
performance of our larger 5×7mm
package. Standby mode and Power-
save Pull-up Resistance is standard.
Packaged on tape and reel in
quantities of 1K.
Dimensions inches (mm)
All dimensions are Max unless otherwise specified.
0.205 Max
(5.2)
P/N XXXX
Frequency
XX
0.134 Max
(3.4)
0.043 ±0.004
(1.1 ±0.1)
0.047
(1.20 )
#1
#2
#4
#3
Denotes pad 1
XXXX=Date Code XX=Lot Code
RECOMMENDED REFLOW SOLDERING PROFILE
260°C
217°C
Ramp-Up
3°C/Sec Max.
Critical
Temperature Zone
Ramp-Down
6°C/Sec.
200°C
0.100 ±0.007
(2.54 ±0.2)
150°C
0.039
(1.0)
0/70°C
SUGGESTED PAD LAYOUT
0.063 SQ
(1.60)
0.086
(2.2)
0.100
(2.54)
0.01uF Bypass Capacitor Recommended
Crystek Part Number Guide
Example: CUSO3392-44.736
Example: CUSOM3392-44.736
Example: CUSOE3392-44.736
Temperature
-20/70°C
-40/85°C
Frequency Stability
PWR
Supply
Preheat
180 Secs. Max.
8 Minutes Max.
90 Secs. Max.
260°C for
10 Secs. Max.
NOTE: Reflow Profile with 240°C peak also acceptable.
mA
M
VM
TEST CIRCUIT
pin 4
Vdd
Bypass
Cap.
E/D
pin 1
pin 3
OUT
OSC.
GND
pin 2
OUT
O/P Load
incl Probe Cl
CUSO3390 CUSOM3390 CUSOE3390
CUSO3392 CUSOM3392 CUSOE3392
CUSO3391 CUSOM3391 CUSOE3391
±100ppm
±50ppm
±25ppm
Standby Function
Function pin 1
Output pin Oscillator State
Open
"1" level 0.7×Vdd Min
"0" level 0.3×Vdd Max
Active
Active
High Z
Normal Operation
Normal Operation
Stopped
High Impedance
Oscillation
Specifications subject to change without notice.
TD-021102 Rev. G
GND or "LOW"
OPEN or "HIGH"
CRYSTEK
CORPORATION
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: [phone] • 800-237-3061
Fax: [phone] • www.crystek.com