CSX4 Datasheet, PDF (1/1 Pages) Crystek Corporation – Quartz Crystal 11.6X5.5 mm Ceramic SMD Crystal

CSX4 Model
11.6X5.5 mm Ceramic SMD Crystal
Frequency Range:
3.5MHz to 30MHz
LeaCRdooFmHrpeSleiant
Calibration Tolerance:
±30ppm to ±100ppm
Frequency Stability:
±30ppm to ±100ppm
Temperature Range:
-40°C to 85°C
Storage:
-45°C to 125°C
Shunt Capacitance:
7.0pF Max
Drive Level:
100uW Typical, 300uW Max
Aging:
±5ppm Max 1st/yr
Quartz Crystal
RECOMMENDED REFLOW SOLDERING PROFILE
260°C
217°C
Ramp-Up
3°C/Sec Max.
Critical Temperature
Zone
Ramp-Down
6°C/Sec.
200°C
150°C
ESR:
Packaging:
Environmental:
Gross Leak Test:
Fine Leak Test:
Thermal Shock:
Moisture Resistance:
Mechanical:
Shock:
Solderability:
Vibration:
Solvent Resistance:
Resistance to Soldering
Heat:
3.5~4.0MHz= 200 Ohms Max
4.1~6.0MHz= 150 Ohms Max
6.1~10.0MHz= 100 Ohms Max
10.1~14.0MHz= 80 Ohms Max
14.1~30.0MHz= 50 Ohms Max
Preheat
180 Secs. Max.
8 Minutes Max.
90 Secs. Max.
260°C for
10 Secs. Max.
NOTE: Reflow Profile with 240°C peak also acceptable.
2K Tape and Reel
MIL-STD-883, Method 1014.10, Condition C
MIL-STD-883, Method 1014.10, Condition A2
MIL-STD-883, Method 1011.9, Condition A
MIL-STD-883, Method 1004.7
0.357±0.008
(11.6±0.20)
CRYSTEK
4.096M
DC
0.200
(5.08)
0.126±0.02
0
(5.5±0.50)
0.079
(2.0)
Suggested Pad Layout
0.200
(5.08)
0.098 0.150
(2.50) (3.80)
0.094
(2.4)
0.094
(2.4)
0.090
(2.3)
0.098
(2.5)
0.090
(2.3)
0.079
(2.0)
0.079
(2.0)
Dimensions inches (mm)
All dimensions are Max unless otherwise specified.
±5ppm max after 3 drops from 75cm onto hard wood board
MIL-STD-883, Method 2003.7
±5ppm max sine vibration 10-55Hz, sweep period 1-2 minutes, amplitude 1.5mm,
3 mutually perpendicular planes each 1 hour
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition I or J
Build Your Own P/N
CSX4-XX-XX-Freq
Frequency Tolerance
at 25°C
Frequency Stability
over Temp Range
A ±30 ppm
B ±50 ppm
A ±30 ppm (-10 to 60°C) <6MHz Only
B ±50 ppm (-10 to 60°C)
C ±100 ppm (-10 to 60°C)
D ±50 ppm (-20 to 70°C) <8MHz Only
E ±100 ppm (-20 to 70°C)
G ±100 ppm (-40 to 85°C)
Example:
CSX4-AB-18-19.680 = ±30ppm at 25°C, ±50ppm -10 to 60°C, Fundamental, 18pF Load Cap, 19.680MHz
Load
Capacitance
S= Series
10= 10pF
14= 14 pF
16= 16 pF
18= 18 pF
20= 20 pF
22= 22 pF
25= 25 pF
32= 32 pF
Specifications subject to change without notice. TD-060801 Rev. C