MP120D3_13 Datasheet, PDF (2/5 Pages) Crydom Inc., – PCB Mount

INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Must Turn On Voltage
Must Turn Off Voltage
Nominal Input Impedance
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS
AC Output
3-32 VDC
3.0 VDC
1.0 VDC
1500 Ohm
1/2 Cycle
1/2 Cycle
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Encapsulation
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443,13.11.1
3) Inductive loads should be diode suppressed
MECHANICAL SPECIFICATIONS
DC Output
3-32 VDC
3.0 VDC
1.0 VDC
1500 Ohm
100 µs
100 µs
DC Output (-B)
3-32 VDC
1.0 VDC
3.0 VDC
1500 Ohm
100 µs
100 µs
Parameters
4000 Vrms
10⁹ Ohm
8 pF
-40 to 80°C
-40 to 125°C
0.7 oz. (20g)
Thermally Conductive Epoxy