H16WD6025_13 Datasheet, PDF (2/7 Pages) Crydom Inc., – panel mount

DataS^Panh^el e^Moe^unt^t
INPUT SPECIFICATIONS ⁽¹⁾
Description
Control Voltage Range (3)
Must Turn-Off Voltage
Maximum Reverse Voltage
Minimum Input Current @ Minimum Voltage (for on-state)
Maximum Input Current @ Maximum Voltage
Nominal Input Impedance
Maximum Turn-On Time [msec] (4)
Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS ⁽¹⁾
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Housing Material
SSR Mounting Torque Range [in lbs/Nm]
Baseplate Material
Input Terminal Screw Torque Range [in-lbs/Nm]
Output Terminal Screw Torque Range [in lb/Nm]
SSR Mounting Screw Torque Range [in-lbs/Nm]
Humidity
LED Input Status Indicator
DC Control
4-32 VDC
1 .0 VDC
32 VDC
7mA
12mA
Current Regulated
1/2 Cycle
1/2 Cycle
Parameters
4000 Vrms
10⁹ Ohm
8 pF
-30 to 80 °C
-40 to 125 °C
2.6 oz (74.9 g)
UL 94 V-0
18-20 (2-2.2)
Aluminum
13-15 /1.5-1.7
18-20 (2-2.2)
18-20 / 2.0-2.2
85% non-condensing
w/”G” option (green)
WIRING DIAGRAM
AC
V
Load (8)
1( )
2( )
1
OUTPUT
2
SOLID STATE RELAY
4
INPUT
3
Terminals
Input
Output
Recommended Wire Sizes
Wire Size
(Solid / Stranded)
24 AWG (0.2 mm²) / 0.2 [minimum]
2 x 12 AWG (3.3 mm²) / 3.3 [maximum]
20 AWG (0.5 mm²) / 0.518 [minimum]
2 x 10 AWG (5.3 mm²) / 5.3
2 x 8 AWG (8.4 mm²) / 8.4 [maximum]
Wire Pull-Out
Strength (lbs)[N]
10 [44.5]
90 [400]
30 [133]
110 [490]
90 [400]
Input Current vs Input Voltage
Standard Regulated “DC” Inputs
25
20
15
10
5
0
0
5
10
15
20
25
30
DC Input Voltage
4 (–)
3 (+)
EQUIVALENT CIRCUIT BLOCK DIAGRAM
-DC 4
(7)
+DC 3
Current
Limiter
Trigger
Circuit
1 AC
2 AC
Do not forget to visit us at: www.crydom.com
Copyright © 2013 Crydom Inc. Specifications subject to change without notice.