D2440D-10 Datasheet, PDF (2/5 Pages) Crydom Inc., – Independently controlled dual output solid-state relay

INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Minimum Turn-On Voltage
Minimum Turn-Off Voltage
Typical Input Current @ 5 VDC (@ 24 VDC for E-Suffix)
Nominal Input Impedance
Maximum Turn-On Time [msec] (4)
Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS
D24XXD
4-15 VDC
4.0 VDC
1.0 VDC
13 mA
300 Ohm
1/2 cycle
1/2 cycle
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Encapsulation
Terminals
GENERAL NOTES
1) All parameters at 25°C and per section unless otherwise specified.
3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, for derating curves see next page.
4) Turn-on time for random turn-on (-10) versions is 0.1 msec
MECHANICAL SPECIFICATIONS
H12D48XXD
4-15 VDC
4.0 VDC
1.0 VDC
13 mA
240 Ohm
1/2 cycle
1/2 cycle
Parameters
4000 Vrms
10⁹ Ohm
10 pF
-40 to 80°C
-40 to 125 °C
3.0 oz (86.5g)
Thermally conductive Epoxy
.25" Fastons, .025" Square Pins
E-SUFFIX
15-32 VDC
15.0 VDC
1.0 VDC
15 mA
1500 Ohm
1/2 cycle
1/2 cycle