D2410 Datasheet, PDF (2/6 Pages) Crydom Inc., – panel mount

INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Maximum Reverse Voltage
Maximum Turn-On Voltage
Minimum Turn-Off Voltage
Typical Input Current
Nominal Input Impedance [Ohms]
Maximum Turn-On Time [msec] (4)
Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS
( D PREFIX)
3-32 VDC
-32
3.0 VDC (5)
1.0 VDC
3.4-20 mA
1500 Ohm
1/2 Cycle
1/2 Cycle
( A PREFIX)
90-280 Vrms
-
90 Vrms
10 Vrms
2.0-4.0 mA
60 K Ohm
10
40
( E SUFFIX)
18-36 Vrms
-
18 Vrms
4.0 Vrms
3 mA
9.0 K Ohm
10
40
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Encapsulation
Terminals
Recommended Terminal Screw Torque Range:
Fastons:
Parameters
4000 Vrms
10⁹ Ohm
8 pF
-40 to 80 °C
-40 to 125 °C
3 oz (86.5g)
Thermally conductive Epoxy
Screw and saddle Clamps Furnished, mounted
6-32 Screws - 10 in/lbs. 8-32 & 10-32 Screws - 20 in. lbs.
Single pair (up to 25A) Double pair* (50A model only) *Caution: User must connect to both pairs
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sink ing required, for derating curves see page 3.
4) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models)
5) For relays with option ”G” minimum control voltage is 4.5VDC