PB4C4 Datasheet, PDF (1/3 Pages) Crydom Inc., – I/O Modules

PB4C4
MOUNTING BOARD
• Screw terminal barrier block for logic connections
• Screw terminal barrier block for load connections
• Resident pull-up resistors
• 5 amp field-replaceable fuses
(LITTLEFUSE #251005 or equivalent)
• LEDs indicate logic status
• All even-numbered logic connections are
logic ground
• Input and output modules accepted interchangeably
• Operate with 5, 15 or 24 volt logic supplies
• Captive-screw retaining system for C4 Modules
MECHANICAL SPECIFICATIONS
0.25˝ [6.4]
SEE THRU
FUSE HOLDER
OUTPUT MODULES
3.25˝ [82.6]
2.75˝ [69.9]
0.25˝ [6.4]
3.25˝ [82.6]
2.75˝ [69.9]
SEE NOTE 3
DIMENSION: INCHES (MILLIMETERS)
TOLERANCE: ±0.20 (±0, 50)
SWAGED STANDOFF (4)
0.62 (15.7)
BARRIER STRIPS
(SEE NOTES 1,2)
LED STATUS INDICATOR
NOTES: 1) BARRIER STRIP IS PHOENIX MKDS5/X 6.35mm
2) ACCEPTS UP TO 10 AWG WIRE
3) LITTLE FUSE 229003S OR EQUIVALENT
Rev. 070808