PB16S Datasheet, PDF (1/3 Pages) Crydom Inc., – MOUNTING BOARD

PB16S
MOUNTING BOARD
• Screw terminal barrier block for logic connections
• Screw terminal barrier block for load connections
• Resident pull-up resistors
• 5 amp field-replaceable fuses
(LITTLEFUSE #251005 or equivalent)
• LEDs indicate logic status
• Logic ground separate for each channel (no common)
• Input and output modules accepted interchangeably
• ^{Operate with 5, 15 or 24 volt logic supplies}
• Captive-screw retaining system for standard-size modules
MECHANICAL SPECIFICATIONS
DIMENSIONS: INCHES (MILLIMETERS)
TOLERANCE:+-0.020 ( ^+- 0,50)
0.25 (6,4)
NYLON STANDOFF
6-32 THD.
SWAGED STANDOFF
THRU HOLE 0.15 (3,8) DIA.
(4)
1.4 (35,6)
1.6 (40,6)
7.3 (185,4)
14.1 (356,9)
6.25 (158,8)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
+-
0.75 (19,1)
0.25 (6,4)
2.2 (55,9)
SCREW TERMINAL
LOGIC SUPPLY
BARRIER STRIP
INPUT/OUTPUT
SIGNAL BARRIER STRIP
(see note 1)
NOTES: 1) 6-32 SCREW TERMINAL BARRIER STRIPS ACCEPT WIRE SIZES FROM 24 TO 12 AWG.
2) OPTIONAL JUMPERS ARE AVAILABLE TO INTERCONNECT COMMONS.
ORDER 1 EACH "JS2" AND 2 EACH "JS8".
3) LITTLE FUSE 251005 OR EQUIVALENT.
POWER BARRIER STRIP
(see notes 1,2)
REPLACEABLE 5 AMP
LINE FUSES (16) (see note 3)
CRYDOM DIGITAL I/O MODULES
SOLD SEPERATELY
PULL UP RESISTORS
3.3K OHM (16)
LED STATUS INDICATORS (16)
POWER BARRIER STRIP
1 2 3 4 5 6 7 8 9 10 1112 1314 1516 1718 19 20 2122 2324 2526 2728 2930 3132
5 AMP LINE
FUSUES (16)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2 I/O MODULE
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3 _{PIN SOCKETS}
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
LED STATUS
INDICATOR (16)
PULL UP
RESISTOR
3.3K OHM
(16)
APPROVALS
UL E79183
CSA 38595
1 2 3 4 5 6 7 8 9 10 1112 1314 1516 1718 1920 2122 2324 2526 2728 2930 3132
SIGNAL INPUT/OUTPUT BARRIER STRIP
Rev. 070808