DRA4-MCX240D5 Datasheet, PDF (1/5 Pages) Crydom Inc., – DRA4 MCX Series

Data^DS^INh^Raie^{l M}e^out^nt
DRA4 MCX Series
PRODUCT SELECTION
Control Voltage
3-15 VDC
15-32 VDC
• 54mm Four Channel DIN Rail Mount SSR Assembly
• AC Ratings up to 280 VAC and 5 Amps
• 3-15 and 15-32VDC control
• Cage style screw terminals for easy connection
• Fits standard 35mm DIN rail
• Includes LED Status indicator
5A
DRA4-MCX240D5
DRA4-MCXE240D5
OUTPUT SPECIFICATIONS ⁽¹⁾
Description
Operating Voltage [VAC]
Transient Overvoltage [Vpk]
Maximum Load Current [Arms] (2)
Minimum Load Current [Arms]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum off-state dv/dt @ maximum rated voltage [V/μsec] (3)
Maximum 1 Cycle Surge Current (50/60 Hz) [Apk]
Maximum I²t for fusing (50/60 Hz, 1/2 cycle) [A² sec]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
INPUT SPECIFICATIONS ⁽¹⁾
Description
Control Voltage Range
Must Turn On Voltage
Must Turn Off Voltage
Typical Input Current
Nominal Input Impedance
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [μsec]
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Status Indicating Display
Weight (typical)
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) See derating chart on page 3
3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
DRA4-MCX(E)240x5
12-280
600
5
0.06
0.1
500
239/250
285/260
1.4
DRA4-MCX
3-15 VDC
3.0 VDC
1.0 VDC
15 mAdc
300 Ohm
1/2 Cycle
1/2 Cycle
DRA4-MCXE
15-32 VDC
15.0 VDC
1.0 VDC
15 mAdc
1500 Ohm
1/2 Cycle
1/2 Cycle
Parameters
4000 Vrms
10 ⁹ Ohms
10 pF
-40ºC to 80ºC
-40ºC to 125ºC
0.32 lb (145.5g)
Themally Conductive Epoxy
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.