D1D100 Datasheet, PDF (1/4 Pages) Crydom Inc., – Relays are easily paralleled for higher-current applications

Series 1-DC
• MOSFET output
• Ratings from 60A to 100A @ 100 VDC
• DC control
• Relays are easily paralleled for higher-current applications
PRODUCT SELECTION
Control Voltage
3.5-32 VDC
OUTPUT SPECIFICATIONS (1)
60A
D1D60
80A
D1D80
100A
D1D100
Description
Operating Voltage [Vdc]
Maximum Off-State Leakage Current @ Rated Voltage [mA]
Maximum On-State Resistance @ Rated Current [RDS-ON][Ohms]
Maximum Load Current (3) [Adc]
Minimum Load Current [mA]
Maximum Surge Current [Adc] (10ms)
Maximum On-State Voltage Drop @ Rated Current [Vdc]
Thermal Resistance Junction to Case (Rjc) [°C/W]
INPUT SPECIFICATIONS (1)
D1D60
0-100 VDC
0.1
0.010
60
5
180
0.6
0.6
D1D80
0-100 VDC
0.2
0.008
80
5
220
0.7
0.47
D1D100
0-100 VDC
0.3
0.005
100
5
330
0.5
0.32
Description
Control Voltage Range
Minimum Turn-On Voltage
Minimum Turn-Off Voltage
Maximum Input Current
Nominal Input Impedance
Maximum Turn-On Time [μsec]
Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS
DC Control
3.5-32 VDC
3.5 VDC
1.0 VDC
1.6 mA (5 VDC), 28 mA (32 VDC)
See Note 4
300
1.0
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Parameters
2500 Vrms
Minimum Insulation Resistance (@ 500 V DC)
10⁹ Ohm
Maximum Capacitance, Input/Output
50 pF
Ambient Operating Temperature Range
-30 to 80°C
Ambient Storage Temperature Range
Weight (typical)
-40 to 125 °C
3.0 oz (86.5g)
Encapsulation
Thermally conductive Epoxy
Terminals
Recommended Terminal Screw Torque Range:
Screws and Saddle Clamps Furnished, Unmounted
6-32 Screws - 10 in lbs. 8-32 and 10-32 Screws -20 in. lbs. (Screws dry without grase)
GENERAL NOTES
1) All parameters at 25°C and per section unless otherwise specified.
2) Dielectric strength and insulation resistance are measured between input and output
3) Heat sinking required, see derating curves.
4) Input circuitry version incorporates active current limiter.