|
CX241_11 Datasheet, PDF (1/5 Pages) Crydom Inc., – PCB Mount | |||
|
CX241 Series
⢠SIP SSR
⢠Ratings to 1.5A @ 280 VAC
⢠SCR output
⢠DC control
⢠Zero-crossing (resistive loads) or random-fire (inductive loads) output
PRODUCT SELECTION
Control Voltage
4-10 VDC
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms]
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3)
Maximum Load Current [Arms](3)
Minimum Load Current [Arms]
Maximum Surge Current (16.6ms) [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Minimum Power Factor (with Maximum Load)
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Must Turn On Voltage
Must Turn Off Voltage
Typycal Input Current @ 5 VDC
Nominal Input Impedance
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz)(2)
Minimum Insulation Resistance (@ 500 VDC) (2)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Encapsulation
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Dielectric and insulation resistence are measured between input and output
3) Off-State dv/dt test method per EIA/NARM standard RS-443
Zero Crossing
CX241
CX241
12-280
600
0.1
500
1.5
0.025
40
1.5
0.5
CX241
4-10 VDC
4.0 VDC
1.0 VDC
15 mAdc
300 Ohm
1/2 Cycle
1/2 Cycle
Parameters
4000 Vrms
10 9 Ohm
8.0 pF
-30 to 80ËC
-30 to 125ËC
0.4 oz. (11 g)
Thermally Conductive Epoxy
Random Fire
CX241R
CX241R
12-280
600
0.1
500
1.5
0.025
40
1.5
0.5
CX241R
4-10 VDC
4.0 VDC
1.0 VDC
15 mAdc
300 Ohm
0.1 msec
1/2 Cycle
|
▷ |