CL240D10R Datasheet, PDF (1/7 Pages) Crydom Inc., – CL Series

Datas^Pah^nele^Me^out^nt
CL Series
• Ratings from 5 A and 10 A @ 24-280 VAC
• Triac Output
• LED Status Indicator
• UL Approved, CE Compliant to EN60950-1
• Improved SEMS screw and washer
• Redesigned housing with anti-rotation barriers
For Generation 3 datasheet click here
• AC or DC control
• EMC Compliant to Level 3
• Epoxy Free Design
PRODUCT SELECTION
Control Voltage
3-32 VDC
90-250 VAC
5A
CL240D05
CL240A05
10 A
CL240D10
CL240A10
AVAILABLE OPTIONS
Series
Control Voltage
A: 90-250 VAC
D: 3-32 VDC
Termination
Blank: Screws & clamps
K: Installed standoffs with Cover
screws for PC Board Blank: Not Included (IP00)
mounting (IP00 only) (1) C: Included (IP20)
CL 240 A 10 K R C H
Required for valid part number
For options only and not required for valid part number
* ^{Not all part number combinations are available.}
Contact Crydom Technical Support for information on
the availability of a specific part number.
Load Voltage
240: 24-280 VAC
Rated Load Current
05: 5 Amps
10: 10 Amps
Switching Type
Thermal Pad
Blank: Zero Voltage
Blank: Not Included
Turn-On
H: Included
R: Instantaneous Turn-On
OUTPUT SPECIFICATIONS ⁽²⁾
Description
Operating Voltage (47-63Hz) [Vrms]
Transient Overvoltage [Vpk] (3)
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]
Maximum Load Current [Arms] (4)
Minimum Load Current [mArms]
Maximum 1 Cycle Surge Current (50/60Hz)[Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum 1/2 Cycle I² t for Fusing (50/60Hz)[A²sec]
Minimum Power Factor (with Maximum Load)
Minimum Heat Sink for Rated Current @ 40°C [°C/W]
INPUT SPECIFICATIONS ⁽²⁾
Description
Control Voltage Range
Maximum Reverse Voltage
Minimum Turn-On Voltage
Must Turn-Off Voltage
Minimum Input Current (for on-state)
Maximum Input Current
Nominal Input Impedance
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [msec]
5A
24-280
600
7
500
5
150
84/100
1.6
2.3
35/42
0.5
3
DC Control
3-32 VDC (5)
-32 VDC
3 VDC
1 VDC
10 mA
14 mA
Current Limited
1/2 Cycle (6)
1/2 Cycle
10 A
24-280
600
7
500
10
150
120/126
1.5
2.3
72/66
0.5
1.5
AC Control
90-250 VAC
-
90 VAC
10 VAC
6 mA
10 mA
Current Limited
20
30
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.