CKM0610_12 Datasheet, PDF (1/4 Pages) Crydom Inc., – DIN rail mount

CKM Series
• Ratings from 10A to 30A @ 60 VDC
• Slim 22.5mm (width) package
• Low Leakage MOSFET Output
• LED input status indicator
• DC control
• DIN Rail and Panel Mount
PRODUCT SELECTION
Description
4-32 VDC Control
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage [VDC]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Maximum Load Current [ADC]
Maximum Surge Current (10msec) [ADC]
Maximum On-State Voltage Drop @ Rated Current [VDC]
Maximum On-state Resistance @ Rated current (RDS-ON) [ohms]
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Minimum Turn-On Voltage
Minimum Turn-Off Voltage
Maximum Input Current (2)
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Status Indicator Display
Weight (typical)
Encapsulation
Terminals
Maximum Wire Size:
Recommended Terminal Screw Torque Range:
Min. Side by Side Spacing
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Input circuitry for incorporates active current limiter.
NOTE: Inductive loads should be diode suppressed.
10 A
CKM0610
CKM0610
0-60
0.1
10
30
0.2
0.02
20 A
CKM0620
CKM0620
0-60
0.1
20
60
0.4
0.018
Parameters
4.0-32 VDC
4.0 VDC
1.0 VDC
9 mA @ 5 VDC, 11 mA @ 32 VDC
1.0
1.0
Parameters
2500Vrms
10⁹ Ohms
8 pF
-40ºC to 80ºC
-40ºC to 125ºC
Green LED
10 oz. (280g)
Thermally Conductive Epoxy
Box Clamp Type
AWG # 10 (3mm)
5.0-6.0 in lb (0.6-0.7 Nm)
0.8 inch (20mm)
30 A
CKM0630
CKM0630
0-60
0.1
30
90
0.5
0.016