XPE2 Datasheet, PDF (9/12 Pages) Cree, Inc – Cree® XLamp® XP-E2 LEDs

xlamp xp-e2 leds
Notes
Lumen Maintenance Projections
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED
lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80
results document at www.cree.com/xlamp_app_notes/LM80_results.
Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/XRE_
lumen_maintenance for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp
Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how
thermal design, ambient temperature, and drive current affect the LED junction temperature.
Moisture Sensitivity
In testing, Cree has found XLamp XP-E2 LEDs to have unlimited floor life in conditions ≤ 30 ºC/85% relative humidity
(RH). Moisture testing included a 168-hour soak at 85 ºC/85% RH followed by 3 reflow cycles, with visual and electrical
inspections at each stage.
Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree
also recommends returning any unused LEDS to the resealable moisture-barrier bag and closing the bag immediately
after use.
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive
2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS),
as amended through April 21, 2006.
Vision Advisory Claim
WARNING: Do not look at exposed lamp in operation. Eye injury can result. See LED Eye Safety at www.cree.com/
xlamp_app_notes/led_eye_safety.
Copyright © 2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, the Cree logo and XLamp^® are registered trademarks
of Cree, Inc.
9