LMD125 Datasheet, PDF (9/12 Pages) Cree, Inc – LED Module Drivers

LMD125 LED Module Driver
Wiring Diagrams
The unique design of the LMD125 LED module driver allows it to be mounted on an internal surface or to a junction box cover. For the
100- to 120-V and 277-V drivers, the leads can be routed through holes in a junction box cover and accessed in a standard junction box.
When surface mounted, the LMD125 driver leads can be routed through the various wiring slots on each side.
Electrical Connection
For the LMD125 100- to 120-V and 277-V LED module drivers, LMH2 LED module operation is accomplished by connecting the AC mains
to the two (2) lead wires (line and neutral) from the driver and connecting the driver output wires to the input leads on the Cree LMH2 light
source, as indicated in the following wiring diagrams. For the LMD125 230-V LED module driver, module operation is accomplished by
connecting the AC mains to the appropriate terminal block pins.
The LMD125 100- to 120-V and LMD125 277-V LED module driver lead wires are 152.4 mm long, 18 AWG with the ends stripped 10 mm.
The LMD125 230-V LED module drivers have poke‑in terminals.
LMD125 100- to 120-V and 277-V Drivers
100-120/277 VAC
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^® and XLamp^® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL^® and the UR logo are registered trademarks of UL LLC.
9