CP41B-RDS Datasheet, PDF (6/7 Pages) Cree, Inc – P4 LED

Mechanical Dimensions
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.
Document No. SPE/LP377UHR1-70G-01-MT
Rev. No.
00
Applications:
- ^{Advertising SCiPg4n1sB-RHS/AHS:}
- ^Indicators
- ^Traffic
- ^{Automotive Lighting}
Absolute Maximum Ratings at Ta = 25°C
Dimension Drawing
CP41B-RDS/RFS/ADS/AFS:
Items
Absolute maximum
Symbol
Unit
Rating
Forward Current^*2
I_F
70
mA
Peak Forward Current^*1 I_FP
200
mA
Reverse Voltage
V_R
5
V
Power Dissipation
Operation Temperature
Storage Temperature
Lead Soldering
Temperature
Electrostatic Discharge
Classification
(MIL-STD-883E)
P_D
T_opr
T_stg
T_sol
ESD
210
mW
-40 ~ +100
°C
-40 ~ +100
°C
Max.260°C for 5 sec Max.
(3mm from the base of the epoxy bulb)
Class II
*1 pul_Nse_ow_ti_edt_sh <=0.1msec duty <=1/10
*2 Heat sink is recommended to be adequated if the device is operated at ambient temperatures higher than 25 deg C. For long term
per_Rfo_orm_HSan_Cce_omth_pe_ld_iari_nv_ce_ecurrents between 10mA and 50mA are recommended. Please contact COTCO sales representative for more
information on recommended drive conditions.
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
Typic^tha^rl ^eE^sl^he^oc^lt^dric^limal^it&^s)O^pp^et^ri^mca^itl^tC^edha^fora^rc^st^ue^cr^hist^si^uc^bs^s(^taTⁿa^c=^es2^,5^o°^rC^a)^{re used in an exempted application, in accordance with EU Direc-}
tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoH_ItS_e)_m, _sas amended th_Sro_yu_mg_bh_olApril 21,_C2_o0_n0_d6_it._ion
Min.
Typ.
Max.
Unit
Vision Advisory Claim
Forward Voltage
Users should
be
cautioned^Vn^F ot
to
stare^IFa⁼t
70mA
the light
of
---
this LED
product.
2.5
The
bright
light
3.0
can
damage
V
the eye.
Reverse Current
I_R
V_R = 5V
---
---
100
µA
Dominant Wavelength
λ_D
I_F = 70mA
618
624
630
Luminous Flux Φ I = 70mA 4400 7500 --- ^{CthoepyCrriegehtlo©go2a0r0e9rCegreiset,eIrnedc.tAralldreigmhatrskrse}_Vosef ^{rCvreede.,TIhnec.infor}_F^{mation in this document is subject to change without notice. Cree and}
8
CLD-CT1143.000
50% Power Angle
2θ½
I_F = 70mA
---
70
---
nm
Cree, Inc.
4600 Silicon Drive
mlm ^{Durham, NC 27703}
USA Tel: [phone]
Fax: [phone]
www.cree.com/ledlamps
deg