CLP6C-RKW Datasheet, PDF (5/8 Pages) Cree, Inc – PLCC6 3-in-1 SMD LED

Graphs
IF (mA)
100.0
80.0
60.0
40.0
Red
Yellow
20.0
0.0
1.8
2.0 2.2
2.4
2.6
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
VF(V)
2.8
Vr(V) ^{-50 -40 -30 -20 -10}
0
0
-10
-20
-30
-40
-50
Ir(uA)
FIG.3 RED &YELLOW REVERSE CURRENT
VS. REVERSE VOLTAGE.
IF(mA)
100
80
Rth j-s=150 C/W
60
40
Rth j-a=250 C/W
20
0
Ta( C)
0 ^{20 40 60 80} 100
FIG.5 RED &YELLOW MAXIMUM FORWARD DCCURRENT
VS AMBIENT TEMPERATURE (Tjmax=110 C)
(RELATIVE LUMINOUS INTENSITY)
2.5
2.0
1.5
Red
1.0
Yellow
0.5
0.0
IF(mA)
0
20 40 60 80 100
FIG.2 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT
(RELATIVE LUMINOUS INTENSITY)
100%
80%
Amber
Red
60%
40%
20%
0%
WL(nm)
300 400 500 600 700 800 900
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
50% Power Angle : 120
(RELATIVE LUMINOUS INTENSITY)
1.0
0
0.5
0-90
-60
-30
0
FIG.6 FAR FIELD PATTERN
30
60
90 ^Angle
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT1183.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
Fax: [phone]
www.cree.com/ledlamps