LO566TBL4-70G-A Datasheet, PDF (4/5 Pages) Cree, Inc – 5-mm Oval LED

Mechanical Dimensions
Document No. SPE/LO566TBL4-70G-A
All dimensions are in mm. Tolerance is ±^R0.2^e5^v.m^Nm^ou^.nless otherw⁰i²se noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Dimension Drawing
Burr around bottom of epoxy may be 0.5 mm max.
C
ute maximum
Unit
Rating
25
mA
100
mA
5
V
100
mW
40 ~ +95
°C
0 ~ +100
°C
260°C for 3 sec Max.
Notes
m the base of the epoxy bulb)
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
stics ( Ta = 25°C) threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc-
tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
Vision Advisory Claim
Con_Ud_si_et_rio_s n_{should be caut}M_ionin_ed. _{not to stare at} T_thy_ep_li._{ght of this LED p}M_roa_dux_c._{t. The bright lig}U_hn_{t c}it_{an damage the eye.}
I_F = 20mA
---
3.4
4.0
V
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
I_F = 1_.0ȝA _CLD-CT0991_..₀7₀₀
---
2.5
V
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
Fax: [phone]
www.cree.com/ledlamps