MX3SWT-A1-0000-000E51 Datasheet, PDF (2/10 Pages) Cree, Inc – Cree XLamp MX-3S LEDs

Flux Characteristics (T_J = 25°C)
The following table provides several base order codes for XLamp MX-3S LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as
a complete description of the order-code nomenclature, please consult the XLamp MX Family LED Binning and Labeling
document.
Color
Cool White
CCT Range
Min.
Max.
5,000 K
8,300 K
Warm White
3,700 K
2,600 K
4,300 K
3,700 K
Base Order Codes
Min Luminous Flux
(lm) @ 115 mA
Group Flux (lm)
R2
114
Q5
107
Q4
100
Q3
93.9
Q3
93.9
Q2
87.4
Order Code
MX3SWT-A1-0000-000E51
MX3SWT-A1-0000-000D51
MX3SWT-A1-0000-000CE5
MX3SWT-A1-0000-000BE5
MX3SWT-A1-0000-000BE7
MX3SWT-A1-0000-000AE7
Notes:
• Cree maintains a tolerance of +/- 7% on flux measurements.
• Typical CRI for Cool White (4,300 K – 8,300 K CCT) is 75.
• Typical CRI for Warm White (2,600 K – 4,300 K CCT) is 80.
Characteristics
Characteristics
Thermal resistance, junction to solder point
Viewing angle (FWHM)
Temperature coefficient of voltage
ESD classification (HBM per Mil-Std-883D)
DC forward current
Forward voltage (@ 115 mA)
LED junction temperature
Unit
°C/W
degrees
mV/°C
mA
V
°C
Minimum
Typical
11
120
-13
Class 2
10.7
Maximum
150
12.0
150
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
2
CLD-DS32 Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
www.cree.com/xlamp