English
Language : 

LO566TWR1-70P-A1 Datasheet, PDF (2/6 Pages) Cree, Inc – 5-mm Oval LED
Standard Bins for LO566TWR1-70P-A1 (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x,y) bins shown.
Orders for LO566TWR1-70P-A1 may be filled with any or all bins contained as below.
All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 20 mA.
2130 mcd
1520 mcd
1100 mcd
770 mcd
D
E
F
Chromaticity Coordinates (x,y)
V or
above
U
T
S
Rank
Chromaticity x
Coordinates y
0.3541
0.3401
D
0.3610 0.4030
0.3900 0.4250
0.3822
0.3580
0.3822
0.3580
E
0.4030 0.4490
0.4250 0.4530
0.4129
0.3725
0.4129
0.3725
F
0.4490 0.5080
0.4530 0.4720
0.4588
0.3838
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Pb content <1000 ppm.
3. Tolerance of measurement of luminous intensity is ±15%.
4. Tolerance of measurement of the chromaticity coordinates is ±0.01.
5. Tolerance of measurement of VF is ±0.05 V.
6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu-
ment.
7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.

CLD-CT105.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps