CP43B-RGS_2 Datasheet, PDF (2/8 Pages) Cree, Inc – P4 LED

Absolute Maximum Ratings (T_A = 25°C)
Items
Forward Current
Peak Forward Current ^Note2
Reverse Voltage
Power Dissipation
Operation Temperature
Storage Temperature
Lead Soldering Temperature
Electrostatic Discharge
Classification (MIL-STD-883E)
Symbol
I_F
I_FP
V_R
P_D
T_opr
T_stg
T_sol
ESD
Absolute Maximum Rating
Red/Amber
70 ^Note1
Unit
mA
200
mA
5
V
210
mW
-40 ~ +100
°C
-40 ~ +100
°C
Max. 260°C for 5 sec. max.
(3 mm from the base of the epoxy bulb)
Class 2
Note:
1. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C.
2. Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (T_A = 25°C)
Characteristics
Forward Voltage
Reverse Current
Dominant Wavelength
Luminous Intensity
50% Power Angle
Color
Red/Amber
Red/Amber
Red
Amber
Red
Amber
Red/Amber
Red/Amber
Symbol
V_F
I_R
λ_D
λ_D
I_V
I_V
2θ½H-H
2θ½V-V
Condition
I_F = 70 mA
V_R = 5 V
I_F = 70 mA
I_F = 70 mA
I_F = 70 mA
I_F = 70 mA
I_F = 70 mA
I_F = 70 mA
Unit
V
μA
nm
nm
mcd
mcd
deg
deg
Minimum
618
584
2130
2130
Typical
2.5
624
591
4500
5000
90
35
Maximum
3.0
100
630
599
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT1135.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
Fax: [phone]
www.cree.com/ledlamps