MLCAWT-A1-0000-000051 Datasheet, PDF (16/20 Pages) Cree, Inc – Available in white (2600 K to 8300 K CCT), 80-, 85- and 90- CRI minimum and royal blue

XLamp ML-C LEDs
Storage Conditions
XLamp ML-C LEDs that have been removed from the original MBB packaging but not soldered should be stored in one
of the following ways:
• Store the parts in a rigid metal container with a tight-fitting lid. Verify that the storage temperature is <30 °C, and
place fresh desiccant and an RH indicator in the container to verify that the RH is no greater than 60%.
• Store the parts in a dry, nitrogen-purged cabinet or container that actively maintains the temperature at <30° and
the RH at no greater than 60%.
• For short-term store only: LEDs can be resealed in the original MBB bag soon after opening. Fresh desiccant may be
needed. Use the included humidity indicator card to verify <60% RH.
If an environment of <60% RH is not available for storage, XLamp ML-C LEDs should be baked (described above) before
reflow soldering.
Vision Advisory Claim
WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and
eye safety, please refer to the Cree LED Eye Safety Application Note (www.cree.com/xlamp_app_notes/led_eye_safety).
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, the Cree logo and XLamp^® are registered
trademarks of Cree, Inc.
16