XBDAWT-00-0000-000000F51 Datasheet, PDF (15/18 Pages) Cree, Inc – XLAMP XB-D LEDS

6
5
NOTICE
Mechanical Dimensions ^{CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION}
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
xlamp xB-D leds
4
3
2
REV
All measurements are ±.13 mm unless otherwise indicated.
D
2.45
1.84
1.633
6
5
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
0.76
4 _0.355
0.817
3
REV
D
2.45
2.45
ANODE
1.84
0.76
0.355
0.817
1.633
2.285
ANODE
C
2.45
Top View
R1.086
0.65
Side View
0.462
0.923
2.285
Bottom View*
C
R1.086
0.462
* Note: In December, 2012, Cree changed the thermal pad of the XB-D package to include the anode notch illustrated
above. XB-D LEDs produced prior to implementation of this change ma0.y65have a different visual app^0.e⁹²a³rance.
0.36
0.82
0.46
B
0.426
0.426
0.852
0.36
B
0.36
0.82
0.46
2.34
0.284
0.426
0.426
0.852
2.272
1.136
0.36
2.34
0.284
2.272
0.28
0.284
1.136
0.36
A
0.92
0.284
2.272
UNLESS OTHERWISE SPECIFIED ^{DRAWN BY}
DAT
DIMENSIONS ARE IN
D. CRONIN 09/
MILLIMETERS AND AFTER FINISH. CHECK
DAT
2.34
0.28
RECOMMEN⁰D^.2E⁸⁴D STENCIL PATTERN
TOLERANCE UNLESS SPECIFIED:
--
.XX ± .25
APPROVED
DAT
RECOMMENDED PCB0S.3O6LDER PAD
A
0.92
(HATCHED ⁰A^.2R⁸E⁴A IS OPENING)
2.272
THIRD ANGLE PROJECTION
.XXX ± .125
X° U±NLESS.5O°THERWISE SPECIFIED
FOR SHEET ME_MT_ILA_LL_IMDP_EIA^MTER^ERNT_SSS^IAOO_NNN_DSL_AAY_FRTEERI^MNA_F^T_IN^E_I^R_S^I_H^AL_.
DRAWN BY
D. CRONIN
CHECK
2.34
RecomRmECOeMnMdEeNDdEDPPCCBBSOSLoDEldR ePArDPad
-- _{RECOMMENDED STENCIL PATTERN}
Recommended Stencil Pattern _-- (HATCHED AREA IS OPENING)
.X T±OLERA1N.C5E UNLESS SPECIFIED:
--
.XX ± .75.XX ± .25
APPROVED
.XXX ± .25.XXX ± .1F2IN5AL PROTECTIVE FINISH
THIRD
ANGLE
PROJECTION^{X° ±}
SURFACE FINIS^FOH^R:
.5 ^X° ^{° ±}
S₁H_.E₆ET METAL
.5 °
PARTS
ONLY
MATERIAL
.X ± 1.5
6
5
4
3
.XX ± .75
2
.XXX ± .25
FINAL PROTECTIVE
X° ± .5 °
SURFACE FINISH: ^1.6
6
5
4
3
Copyright © 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, the Cree logo and XLamp^® are registered
trademarks of Cree, Inc.
15