XREWHT-L1-0000-00901 Datasheet, PDF (11/14 Pages) Cree, Inc – XLamp XR-E LED

XLamp XR-E leds
Storage Conditions
XLamp LEDs that have been removed from original MBB packaging but not soldered yet should be stored in a room or
cabinet that will maintain an atmosphere of 25 ± 5 ºC and no greater than 10% RH (relative humidity). For LEDs stored
in these conditions, storage time does not add to exposure time as defined in the Moisture Sensitivity section above.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to
as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU
Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained
from your Cree representative or from the Product Documentation sections of www.cree.com.
REACh Compliance
REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical
Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,
please contact a Cree representative to insure you get the most up-to-date SVHC Declaration. REACh banned substance
information (REACh Article 67) is also available upon request.
Vision Advisory Claim
WARNING: Do not look at exposed lamp in operation. Eye injury can result. See LED Eye Safety at www.cree.com/
xlamp_app_notes/led_eye_safety.
Copyright © 2006-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, the Cree logo and XLamp^® are registered
trademarks of Cree, Inc.
11