XP-G2 Datasheet, PDF (1/30 Pages) Cree, Inc – Cree XLamp XP-G2 LEDs

Cree^® XLamp^® XP-G2 LEDs
Product family data sheet
Product Description
FEATURES
Table of Contents
The XLamp^® XP-G2 LED builds on the •
unprecedented performance of the
original XP-G by increasing lumen output •
up to 20% while providing a single die LED •
point source for precise optical control. •
The XP-G2 LED shares the same footprint •
as the original XP-G, providing a seamless •
upgrade path and shortening the design •
cycle.
•
XLamp XP-G2 LEDs are the ideal choice •
for lighting applications where high •
light output and maximum efficacy are •
required, such as LED light bulbs, outdoor
lighting, portable lighting, indoor lighting
and solar-powered lighting.
Available in white, outdoor white and
80-, 85- and 90-CRI white
ANSI-compatible chromaticity bins
Binned at 85 °C
Maximum drive current: 1500 mA
Low thermal resistance: 4 °C/W
Wide viewing angle: 115°
Unlimited floor life at
≤ 30 ºC/85% RH
Reflow solderable - JEDEC J‑STD‑020C
Electrically neutral thermal path
RoHS and REACh compliant
UL^® recognized component (E349212)
Characteristics.............................................2
Flux Characteristics.....................................3
Relative Spectral Power Distribution....... 10
Relative Flux vs. Junction Temperature... 10
Electrical Characteristics.......................... 11
Relative Flux vs. Current........................... 11
Relative Chromaticity vs Current and
Temperature.............................................. 12
Typical Spatial Distribution....................... 13
Thermal Design......................................... 13
Performance Groups – Luminous Flux... 14
Performance Groups – Chromaticity....... 15
Cree’s Standard Chromaticity Regions
Plotted on the 1931 CIE Curve................. 18
Cree’s Standard Cool White Kits Plotted
on ANSI Standard Chromaticity
Regions...................................................... 20
Cree’s Standard Warm and Neutral
White Kits Plotted on ANSI Standard
Chromaticity Regions............................... 21
Cree’s Standard Chromaticity Kits........... 23
Bin and Order Code Formats.................... 24
Reflow Soldering Characteristics............. 25
Notes......................................................... 26
Mechanical Dimensions........................... 28
Tape and Reel............................................ 29
Packaging.................................................. 30
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^® and XLamp^® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL^® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]