|
XMLEZW-00-0000-0B00U450H Datasheet, PDF (1/22 Pages) Cree, Inc – XLamp XM-L EasyWhite® LEDs | |||
|
Cree® XLamp® XM-L EasyWhite® LEDs
Product family data sheet
Product Description
The XLamp® XM-L EasyWhite® (EZW)
LED eliminates chromaticity binning, and
enables luminaire and bulb manufacturers
to deliver the consistent color and high
efficacy light output of a multiâdie LED in
the compact XM-L footprint. XLamp XMâL
EasyWhite LEDs can reduce LEDâtoâLED
color variation to within a 2âstep MacAdam
ellipse, 94% smaller than the total area of
the corresponding ANSI C78.377 color
region.
The XLamp XM-L EasyWhite LED is the
perfect choice for lighting applications
where moderate to high luminous flux
output is required from a single, small
point source. Example applications
include: LED retrofit bulbs, commercial/
retail display spotlights, and other indoor
general-illumination applications.
FEATURES
⢠Available in 4-step and 2-step
EasyWhite bins at 2700 K, 3000 K,
3500 K, 4000 K, 5000 K CCT
⢠Wide range of operating current â up
to 2 A @ 6 V
⢠85 °C binning and characterization
⢠Available in 6âV and 12âV versions
⢠Low thermal resistance: 2.5 °C/W
⢠Wide viewing angle: 115°
⢠Wide variety of CRI choices: standard
CRI as well as 80-, 85-, 90âminimum
CRI
⢠Electrically neutral thermal path
⢠Unlimited floor life at ⤠30 ºC/85%
RH
⢠Reflow solderable - JEDEC
JâSTDâ020C
⢠RoHS and REACh compliant
⢠UL® recognized component
(E349212)
Table of Contents
Characteristics............................................2
Flux Characteristics, Standard Order
Codes and Bins, 6-Volt XM-L EZW.............3
Flux Characteristics, Standard Order
Codes and Bins, 12-Volt XM-L EZW...........6
Relative Spectral Power Distribution.........9
Relative Flux vs. Junction Temperature.....9
Electrical Characteristics..........................10
Relative Flux vs. Current...........................11
Relative Chromaticity vs. Current and
Temperature..............................................12
Typical Spatial Distribution.......................13
Thermal Design.........................................13
Performance Groups â Brightness..........14
Performance Groups â Chromaticity.......14
Cree EasyWhite® Bins Plotted on the
1931 CIE Color Space...............................15
Cree ANSI White Bins Plotted on the
1931 CIE Color Space...............................16
Bin and Order Code Formats....................16
Reflow Soldering Characteristics.............17
Notes.........................................................18
Mechanical Dimensions...........................20
Tape and Reel............................................21
Packaging..................................................22
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
|
▷ |