XMLEZW-00-0000-0B00T627H Datasheet, PDF (1/17 Pages) Cree, Inc – Cree® XLamp® XM-L Family LEDs

Binning & Labeling
Cree^® XLamp^® XM-L Family LEDs
Table of Contents
Introduction......................................................... 1
Bin and Order-Code Format................................... 2
Performance Groups – Luminous Flux...................... 3
Performance Groups – Chromaticity........................ 3
Performance groups – Voltage................................ 6
Cree’s Standard Chromaticity Regions Plotted on the
1931 CIE Curve.................................................... 7
Cree’s Standard Cool White Kits Plotted on ANSI
Standard Chromaticity Regions............................... 8
Cree’s Standard Warm and Neutral White Kits
Plotted on ANSI Standard Chromaticity Regions...... 10
Cree’s Standard Chromaticity Kits......................... 11
Standard Order Codes and Bins (XM-L ANSI Cool
White, T_J = 25 °C).............................................. 12
Standard Order Codes and Bins (XM-L ANSI Neutral
White, T_J = 25 °C).............................................. 12
Standard Order Codes and Bins (XM-L ANSI Warm
White, T_J = 25 °C).............................................. 13
Standard Order Codes and Bins (XM-L2 ANSI Cool
White, T_J = 85 °C).............................................. 14
Standard Order Codes and Bins (XM-L2 ANSI
Neutral White, T_J = 85 °C)................................... 14
Standard Order Codes and Bins (XM-L2 ANSI Warm
White, T_J = 85 °C).............................................. 15
Standard Order Codes and Bins (XM-L High Voltage
ANSI Cool White, T_J = 85 °C)............................... 16
Standard Order Codes and Bins (XM-L High Voltage
ANSI Neutral White, T_J = 85 °C)........................... 16
Standard Order Codes and Bins (XM-L High Voltage
ANSI Warm White, T_J = 85 °C)............................. 17
Introduction
This document describes the product nomenclature
required to select and order Cree’s XLamp XM-L family
of LEDs. XLamp XM-L family LEDs are tested and sorted
into bins which are then combined into orderable kits
identified by an order code.
All XLamp LEDs are tested and sorted by color and
brightness into a unique bin. Each bin contains LEDs
from only one color and brightness group and is uniquely
identified by a bin code. White XLamp LEDs are sorted by
chromaticity (color) and luminous flux (brightness). High
Voltage White XLamp LEDs are sorted by chromaticity,
luminous flux and voltage. LEDs are shipped on reels
containing LEDs from one bin and are always labeled
with the appropriate bin code.
Kits contain LEDs from a number of similar bins and are
fully defined by their order codes. A full explanation of
the order codes for XLamp XM-L family LEDs, as well
as a list of standard order codes, is provided in this
document.
Copyright © 2010-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes
only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
For warranty information, please contact Cree Sales at [e-mail].
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]