XM-L2 Datasheet, PDF (1/14 Pages) Cree, Inc – Cree XLamp XM-L2 LEDs

Cree^® XLamp^® XM-L2 LEDs
Product family data sheet
Product Description
The XLamp^® XM-L2 LED builds on the
unprecedented performance of the
original XM-L, increasing lumen output
up to 20% while providing a single die
LED point source for precise optical
control. The XM-L2 LED shares the same
mechanical and optical footprint as the
original XM-L, providing a seamless
upgrade path and shortened design
cycle.
XLamp XM-L2 LEDs are the ideal choice
for lighting applications where high
light output and maximum efficacy are
required, such as LED light bulbs, outdoor
lighting, portable lighting, indoor lighting
and solar-powered lighting.
FEATURES
• Available in white, 70‑CRI white,
80‑CRI white, 85‑CRI white and
90‑CRI white
• ANSI‑compatible chromaticity bins
• Binned at 85 °C
• Maximum drive current: 3000 mA
• Low thermal resistance: 2.5 °C/W
• Wide viewing angle: 125°
• Unlimited floor life at
≤ 30 ºC/85% RH
• Reflow solderable - JEDEC
J‑STD‑020C
• Electrically neutral thermal path
• RoHS and REACh compliant
• UL^® recognized component
(E349212)
Table of Contents
Characteristics......................................... 2
Flux Characteristics.................................3
Relative Spectral Power Distribution......5
Relative Flux vs. Junction Temperature..5
Electrical Characteristics.........................6
Relative Flux vs. Current..........................6
Relative Chromaticity vs. Current............7
Relative Chromaticity vs. Temperature...7
Typical Spatial Distribution......................8
Thermal Design........................................8
Reflow Soldering Characteristics............9
Notes......................................................10
Mechanical Dimensions........................12
Tape and Reel.........................................13
Packaging...............................................14
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^® and XLamp^® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL^® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]