XHP35 Datasheet, PDF (1/37 Pages) Cree, Inc – Cree XLamp XHP35 LEDs

Cree^® XLamp^® XHP35 LEDs
Product family data sheet
XHP35 High Density LED
XHP35 High Intensity LED
Product Description
FEATURES
Table of Contents
The XLamp^® XHP35 LED brings the
performance of Cree’s Extreme High
Power LEDs to the XP footprint, setting a
new standard for performance delivered
by a 3.45 x 3.45 mm LED. Leveraging the
breakthrough 12‑V monolithic power die
built on Cree’s innovative architecture and
uniquely enabled by the SC5 Technology™
Platform, the XHP35 LED allows the
use of readily available cost‑-optimized
drivers to unleash the capabilities of
Cree’s high‑power LEDs. Available in both
high‑density and high‑intensity versions,
the XHP35 LED is application optimized
to enable new designs and radically lower
system costs.
• Available in white in high‑density and
high‑intensity versions for design
flexibility
• XHP35 High Intensity LED is
optimized to deliver maximum
candela through secondary optics
• Available in 5-step EasyWhite^® bins
at 2700 K to 5700 K CCT and 3-step
EasyWhite bins at 2700 K to 3500 K
CCT
• Available in ANSI white bins at
2700 K to 7000 K CCT
• Available in standard, 70-, 80-, 85-
and 90‑minimum CRI options
• Binned at 85 °C
• Maximum drive current: 1050 mA
• Low thermal resistance: 1.8 °C/W
• Wide viewing angle: 115° for high
intensity, 125° for high density
• Unlimited floor life at
≤ 30 ºC/85% RH
• Reflow solderable - JEDEC
J‑STD‑020C
• RoHS and REACh compliant
• UL^® recognized component
(E349212)
Characteristics...............................................2
Flux Characteristics, High Density
EasyWhite^® Order Codes and Bins................3
Flux Characteristics, High Density ANSI
White Order Codes and Bins.........................5
Flux Characteristics, High Intensity
EasyWhite^® Order Codes and Bins................8
Flux Characteristics, High Intensity ANSI
White Order Codes and Bins...................... 11
Relative Spectral Power Distribution......... 15
Relative Flux vs. Junction Temperature..... 15
Electrical Characteristics............................ 16
Relative Flux vs. Current............................. 16
Relative Chromaticity vs. Current............... 17
Relative Chromaticity vs. Temperature...... 18
Typical Spatial Distribution......................... 19
Thermal Design........................................... 20
Performance Groups – Luminous Flux..... 20
Performance Groups – Chromaticity......... 21
Cree’s EasyWhite^® Chromaticity Regions
Plotted on the 1931 CIE Curve................... 24
Cree’s Standard Cool White Kits Plotted
on ANSI Standard Chromaticity Regions... 27
Cree’s Standard Warm and Neutral White
Kits Plotted on ANSI Standard
Chromaticity Regions................................. 28
Bin and Order Code Formats...................... 29
Reflow Soldering Characteristics............... 30
Notes........................................................... 31
Mechanical Dimensions............................. 33
Tape and Reel.............................................. 35
Packaging.................................................... 37
Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^®, XLamp^® and
EasyWhite^® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL^® and the UR logo are registered
trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]