XBDAWT-00-0000-00000HAE7 Datasheet, PDF (1/13 Pages) Cree, Inc – XLAMP XB-D LED BINNING & LABELING

binning & Labeling
Cree^® XLamp^® XB-D White LEDs
Table of Contents
Introduction.......................................................... 1
Bin and Order-Code Format.................................... 2
Performance Groups – Brightness (T_J = 85 °C)......... 2
Performance Groups – Chromaticity......................... 3
Cree’s Standard Chromaticity Regions Plotted on the
1931 CIE Curve..................................................... 6
Cree’s Standard Kit Codes Plotted on ANSI Standard
Chromaticity Regions............................................. 7
Cree’s Standard Chromaticity Kits...........................11
Standard Kits, Codes and Bins
XB-D ANSI Cool White, T_J = 85 °C......................11
XB-D Neutral White, T_J = 85 °C..........................12
XB-D Warm White, T_J = 85 °C............................13
Introduction
This document describes the product nomenclature
required to select and order Cree’s XLamp XB-D
LEDs. XLamp XB-D LEDs are tested and sorted into
bins which are then combined into orderable kits,
identified by an order code.
All XLamp LEDs are tested and sorted by color and
brightness into a unique bin. Each bin contains LEDs
from only one color and brightness group and is
uniquely identified by a bin code. White XLamp LEDs
are sorted by chromaticity (color) and luminous
flux (brightness). Color XLamp LEDs are sorted
by dominant wavelength (color) and luminous or
radiant flux (brightness). LEDs are shipped in reels
containing LEDs from a single bin and labeled with
the corresponding bin code. XLamp LED packaging
details are provided in product data sheets.
Kits contain LEDs from a number of similar bins
and are fully defined by their order codes. A full
explanation of the order codes for XLamp XB Family
LEDs, as well as a list of standard order codes, is
provided in this document.
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is
not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
www.cree.com/xlamp