MX3AWT-A1-0000-000ADZ Datasheet, PDF (1/24 Pages) Cree, Inc – XLamp MX Family LEDs

Cree^® XLamp^® MX Family LEDs
Binning & Labeling
Table of contents
Bin and Order-Code Formats..........................................................2
Performance Groups – Brightness................................................3
Performance Groups – V_F .............................................................3
Performance Groups – Chromaticity.............................................4
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE
Curve................................................................................................7
Standard Order Codes and Bins
MX-3 Cool White..........................................................................8
MX-3 Warm White.......................................................................9
MX-6 Cool White........................................................................10
MX-6 80-CRI Minimum Cool White...........................................11
MX-6 80-CRI Minimum, White..................................................12
MX-6 Outdoor Warm White.......................................................14
MX-6 Warm White.....................................................................15
MX-6 2200 K, Warm White........................................................16
MX-3S Cool White.....................................................................17
MX-3S Warm White...................................................................18
MX-6S Cool White.....................................................................19
MX-6S 80-CRI Minimum, Cool White........................................20
MX-6S 80-CRI Minimum, White................................................21
MX-6S Warm White...................................................................23
Introduction
This document describes the product nomenclature required
to select and order Cree’s XLamp^® MX Family of LEDs. XLamp
MX Family LEDs are tested and sorted into bins which are then
combined into orderable kits identified by an order code.
All XLamp LEDs are tested and sorted by color and brightness
into a unique bin. Each bin contains LEDs from only one color
and brightness group and is uniquely identified by a bin code.
White XLamp LEDs are sorted by chromaticity (color), luminous
flux (brightness) and sometimes voltage and/or color rendering
index (CRI). LEDs are shipped on reels containing LEDs from
one bin and are always labeled with the appropriate bin code.
Kits contain LEDs from a number of similar bins and are fully
defined by their order codes. A full explanation of the order
codes for XLamp MX Family LEDs, as well as a list of standard
order codes, is provided in this document.
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree^® and XLamp^® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty
or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree
Sales at [e-mail].
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]